Updated on July 14, 2017
Water heater systems are essential in daily life especially if one lives cold in areas. They use both gas and electricity to heat the water for homes and other places where hot water is needed. Like with all other systems, they have problems too.
Below are the common problems with a hot water system.
Due to some faultiness during production, the storage may start to leak. Also, if the tank is old, it may have leaking problems. In that case, it loses a lot of water, and hence immediate repair is necessary.
Failing to Heat Water
The system may fail to deliver hot water. The main reason is that the water heater is undersized therefore failing to produce enough heat to heat the water. Still, if the surrounding temperatures are low, the water in the tank gets significantly cold, and the heater is forced to do extra work to heat it. Also, as the water moves through the delivery pipes, it loses heat.
Producing too Hot Water
In this case, the heater’s dial may have been adjusted to increase the temperatures probably during cold seasons. The solution is to turn the dial so as to lower the temperatures. If it does not respond within hours, then the dial has malfunctioned and will need repair.
Producing Boiling Sounds
A boiling sound is as a result of water overheating. It could also indicate a pressure build up inside the tank. Such a scenario is dangerous and immediate help from professional service providers should be sought.
Corrosion of the Tank and Delivery Pipes
With time, hot water especially may have corrosion effects on the lining of the tank and the pipes. This corrosion results in discolored water.
The reaction of hot water with the anode rod of the heater is the cause of the odor in the water. Smelly water could also be as a result of gas leakage, and that calls for an immediate shutdown of the gas valves for safety purpose.
Corroding water may carry with it corroded materials thereby discoloring the delivered water. If the source of water has some traces of copper, iron or other minerals, they may cause the water to discolor.
The buildup of Sediment in the Bottom of the Tank
Water from the source carries with it different materials. These materials end up settling at the bottom of the tank. If a disturbance occurs, the water ends up being dirty.
With the above knowledge of common problems with a hot water system, it is easier to troubleshoot any problem that may arise and act accordingly. Take a look at hot water system repairs perth and seek the help of a professional.